[INCH-POUND]
A-A-50501
18 July 1991
COMMERCIAL ITEM DESCRIPTION
AUGER MACHINES, PIPE AND SEWER CLEANER:
GASOLINE-ENGINE-DRIVEN, TRAILER MOUNTED
The General Services Administration has authorized the use of this Commercial Item Description as a replacement for military specification MIL-A-28672B (YD) which is cancelled.
Abstract. This Commercial Item Description (CID) covers three sizes of gasoline-engine-driven, trailer mounted auger machines using sectional rods for unclogging and cleaning of pipes and sewers.
Salient Characteristics.
1. The three sizes of auger machines covered by this CID are:
a. Size 1 - Minimum capacity 500 feet.
b. Size 2 - Minimum capacity 800 feet.
c. Size 3 - Minimum capacity 1,000 feet.
2. The auger machine shall be fully hydraulic and be provided with, as a minimum, the following controls, valves, gages, and accessories. All controls shall be mounted on a control panel which is situated such that the operator can observe the equipment operation while manipulating the controls.
a. Variable speed rotation, O to not less than 150 revolutions per minute.
b. Clockwise and counterclockwise rotation.
c. Push and pull rod travel actuator.
d. Automatic obstruction response sensor.
|
Beneficial comments (recommendations, additions, deletions) and any pertinent data which may be of use in improving this document should be addressed to: Commanding Officer (Code 156), Naval Construction Battalion Center, Port Hueneme, CA 93043-5000, by using the self-addressed Standardization Document Improvement Proposal (DD Form 1426) appearing at the end of this document or by letter. |
DISTRIBUTION STATEMENT A. Approved for public release; distribution is unlimited.
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business